sale

Điều Khiển Sạc Năng Lượng Mặt Trời Tự Động PWM 20A-12V/24V

It is a device that performs the function of regulating the battery’s charge, protects the battery against overloading and over-discharge to enhance the life of the battery, and helps the solar system to use effectively. fruit and fruit

1.000.000 400.000

Thanh toán ngay

It is a device that performs the function  of regulating the battery’s charge , protects the  battery against overloading  and over-discharge to enhance the life of the  battery,  and helps the solar system to use effectively. fruit and lasting. –  The controller  also shows the charge status of the solar panel on the battery to help users control the loads. – The controller also performs protection against overvoltage (> 13.8V) or low voltage (<10.5V). The controller protection circuit will perform a circuit break when  the controller  confirms that the battery is fully charged or the battery voltage is too low.

 Instruction manual & connection diagram:

– Use within the range of machine specifications.

– Carefully observe the input and output terminals before connecting the pole (+) to the pole (+), the pole (-) against the pole (-).

– Led lights show:

+ Led charging indicator:

Lights off: No charging, no connection to  solar panels  or  weak sunlight

Light on: The indicator is charging

Flashing light: Full battery indicator or charging indicator

+ Led battery capacity indicator  :

Green indicator light: Full alert

Yellow indicator LED: Normal report

Red indicator light blinks: Low voltage protection for the battery

+ Led download notification:

Open leds: Download

Led off: Download

Led light blinks: Off load,  output overload or short circuit

 

Specifications

Model

PWM2024B

Battery input voltage MT

12VDC (Maximum open-circuit voltage of 21V Max.)

Charging line

20A max.

Output voltage load

12V / 24 DC (according to battery voltage)

Output current load

20A max

Loss line

25 mA

Charging disconnection threshold (battery is full)

Vbatt ≥14.5V ± 2%

Recharge

Vbatt ≤ 13.6 V ± 2%

Protect Overload

I load> 20A   Protection by fuse

Battery low voltage

Vbatt ≤ 10.2V ± 2% Automatically cuts off the output voltage

LED display

Solar signal is on (green)

With DC power out load (bright yellow LED)

Overload / Low Pitch (yellow LED is off)

Tank Capacity: Full (Full) / Normal (Normal) / Empty (Empty)

Dimensions (mm)

170 x 120 x 40

Weight

0.5 kg

Guarantee

01 month

 

Picture

//////////////////////

Application

– Control charging  and regulating the battery charge   in the solar power system, supplying electricity to household electric equipment such as lighting, televisions, CD players, Video systems, computer stands, telephone exchange, computers fax, fan, water pump, internet or company, office building …

Application model for non-chargers for batteries from the national 220v power grid, only use from 12v to 220vac batteries :

 

Application Inverter samyoung 100W


 
 
Application model for charging type for batteries from the national 220v power grid :
 
Application Inverter samyoung 100W

 

LƯU Ý : Mọi thông số trên tất cả các sản phẩm của Website đều mang tính chất tham khảo theo thuyết tương đối và hoàn toàn có thể thay đổi mà không báo trước