It is a device that performs the function of regulating the battery’s charge , protects the battery against overloading and over-discharge to enhance the life of the battery, and helps the solar system to use effectively. fruit and lasting. – The controller also shows the charge status of the solar panel on the battery to help users control the loads. – The controller also performs protection against overvoltage (> 13.8V) or low voltage (<10.5V). The controller protection circuit will perform a circuit break when the controller confirms that the battery is fully charged or the battery voltage is too low.
Instruction manual & connection diagram:
– Use within the range of machine specifications.
– Carefully observe the input and output terminals before connecting the pole (+) to the pole (+), the pole (-) against the pole (-).
– Led lights show:
+ Led charging indicator:
Lights off: No charging, no connection to solar panels or weak sunlight
Light on: The indicator is charging
Flashing light: Full battery indicator or charging indicator
+ Led battery capacity indicator :
Green indicator light: Full alert
Yellow indicator LED: Normal report
Red indicator light blinks: Low voltage protection for the battery
+ Led download notification:
Open leds: Download
Led off: Download
Led light blinks: Off load, output overload or short circuit
Specifications
| Model |
PWM2024B |
|
| Battery input voltage MT |
12VDC (Maximum open-circuit voltage of 21V Max.) |
|
| Charging line |
20A max. |
|
| Output voltage load |
12V / 24 DC (according to battery voltage) |
|
| Output current load |
20A max |
|
| Loss line |
25 mA |
|
| Charging disconnection threshold (battery is full) |
Vbatt ≥14.5V ± 2% |
|
| Recharge |
Vbatt ≤ 13.6 V ± 2% |
|
| Protect | Overload |
I load> 20A Protection by fuse |
| Battery low voltage |
Vbatt ≤ 10.2V ± 2% Automatically cuts off the output voltage |
|
| LED display |
Solar signal is on (green) |
|
|
With DC power out load (bright yellow LED) |
||
|
Overload / Low Pitch (yellow LED is off) |
||
|
Tank Capacity: Full (Full) / Normal (Normal) / Empty (Empty) |
||
| Dimensions (mm) |
170 x 120 x 40 |
|
| Weight |
0.5 kg |
|
| Guarantee |
01 month |
|
Picture
//////////////////////
Application
– Control charging and regulating the battery charge in the solar power system, supplying electricity to household electric equipment such as lighting, televisions, CD players, Video systems, computer stands, telephone exchange, computers fax, fan, water pump, internet or company, office building …
Application model for non-chargers for batteries from the national 220v power grid, only use from 12v to 220vac batteries :
LƯU Ý : Mọi thông số trên tất cả các sản phẩm của Website đều mang tính chất tham khảo theo thuyết tương đối và hoàn toàn có thể thay đổi mà không báo trước
